Das ist im übrigen Falsch. Die Britische variante sagt was die maximalbedingung für ein Mini_roundabout ist. Sie sagt nichts anderes:
1.1 A mini-roundabout has a central circular solid
white road marking, which is flush with the road
surface or slightly domed, instead of the central island
found on conventional roundabouts. The marking is
between one and four metres in diameter. If it is domed
it may be up to 125mm at its highest point although this
standard recommends it does not exceed 100mm. A
mini-roundabout must have an Inscribed Circle
Diameter (ICD) of 28m or less (see paragraph 6.1).
D.h. der mini_roundabout MUSS kleiner sein als 28m aussen - und 4m innen, und darf nicht höher als 125mm hochstehen. Dann KANN es nach BAUvorschrift als Mini Roundabout ausgeführt werden.
Es steht aber nicht drin das es nicht kleinere normale roundabouts gibt.
Deshalb hab ich auch in dem Thread mehrfach erwähnt: “Nicht alles was hinkt ist ein vergleich” denn der Umkehrschluss wird hier überhaupt nicht erwähnt, auf den Beziehst du dich aber.
Flo